Description
When low water pressure gets you down, power it up with our Giantz 6-stage Water Pump. It is the perfect solution where constant on-demand water pressure is needed at the open and close of any tap. You will find our water pump particularly useful for homes, household gardens, farms, commercial entities or any situation where pressurised water is consistently required. The water pump features an IP-rated commercial motor, full stainless steel pump body, cast iron ends, 1.25‘’ inlet and 1‘’ outlet ports, corrosion-resistant brass connectors, efficient cooling system and not least, built-in thermal protection. Pumping out at a rate of 200L/min with a 70m head, the 2500W water pump can send water up to two stories high effortlessly. You can also accurately control the pressure to your precise requirements with the fully automatic controller and monitor it at a glance of the pressure gauge. Power to the pump is as simple as plugging it straight into any Australian standard socket. Whether you are using the pump as a permanent installation or on an ad hoc basis, you can be assured of dependable and reliable water supply in more ways than one.
Features:
Powerful 2500W self-priming multi-stage pump
Garden irrigation, farm irrigation and home water supply
100% duty cycle - designed for continuous operation
Rust-resistant stainless steel pump body with cast iron ends
Fully automatic operation on/off controller
Huge 70m head
Anti-corrosive alloy motor housing, ceramic and carbon seals
Built-in thermal protection
Efficient cooling system
Highly conductive copper motor
Corrosion-resistant brass connector
Leak proof rubber ring
Easy connecting plug and cable
Fully automatic pressure controller
Adjustable start-up pressure
Australian standard cable and plug
Specifications:
Pump:
MAX power: 2500W, 3.5hp
Plug and cord: SAA 250V/10A *0.3m
Max pump flow: 12,000L/h (200L/min)
Max head: 70m
Duty cycle: Continuous
Impeller Stainless steel
Pump body: Stainless steel
Motor shaft: Stainless steel
Inlet diameter: 1.25'' (30mm)
Outlet diameter: 1'' (25mm)
Brass connector: 1''
Protection class: IP44
Insulation class: B (130°C)
Max ambient temperature: 40°C
Max liquid temperature: 60°C
Controller:
Voltage: 220/240V
Frequency: 50/60Hz
Maximum current: 10A
Maximum water temperature: 60°C
Maximum pressure for use: 10bar
Protection grade: IP65
Inlet and outlet size: 1‘’(25mm)
Dimensions: 22cm x 12.4cm x 17cm
Colour: Yellow
Package Contents:
Giantz 6-stage Water Pumpx 1
Pump Controllerx 1
User manualx1